Fences are important for keeping our homes safe. They help in preventing the entry of unwanted intruders and thus keeping our house secure. There are different types of fences available in the market depending on our needs. Posts are usually made out of wood, but some fences use aluminum posts to avoid rotting or being eaten by pests.

Aluminum should not be set in concrete as Aluminum reacts with the alkalis in portland cement producing hydrogen gas, causing corrosion on the aluminum fence posts. Instead, you should create a concrete base and use surface-mount posts to secure your post.

We hope this article will help those who decide to use Aluminum for their garden and backyard’s fencing – they can learn how to pick the right kind and what it is made of and what height and design suit them best.

What You Should Know About Aluminum Fence Posts

The following is a list of things you should know about aluminum fence posts:

• They are easier to install and less time-consuming than wood posts.
• Aluminum fence posts are virtually indestructible, meaning that they will not rot, rust, or split.
• They allow for a wider range of installation heights than wood fences.
• They offer more space for landscaping than wood fences.
• The aluminum fence post is the most commonly used metal for fences. They are durable and hold up well in all kinds of weather.

Which Type of Aluminum Fence Post is the Best for Your Home?

There are many styles of aluminum posts to choose from, and selecting the right one for your home requires some research. Aluminum posts are generally either round or square. 

The most popular type of post is the round post, with a circular base. This is what you might use in an area that is not heavily trafficked.

The square post has a flat base that is wider than it is tall and can be used in more heavily trafficked areas.

You should also think about how high you need your fence to be when choosing between these two types of posts. For example, the round post may not be suitable if you have young children in your home or a high-traffic area.

How Deep Should An Aluminum Fence Post Be?

For an aluminum post, the bottom should be 4 inches below ground level, and it should be 8 inches above ground level for an underground installation.

If installing an aluminum post above ground, the bottom should only go 4 inches below ground level. It should be buried at least 12 inches deep to prevent damage and corrosion.

Are Aluminum Fence Posts Strong?

Aluminum is a lightweight material that is strong and durable. Aluminum doesn’t rust or rot, so it can be used in many different settings without worrying about damaging the weather.

In addition, the aluminum fence posts have a thickness of 3/8″, making them very easy to install into the ground without having to use concrete or another material to help them stay firmly in place.

Does Aluminum Fence Bend Easily?

Some people think that aluminum posts are more likely to bend under pressure than steel posts. But this is not the case. The aluminum posts are designed to resist bending better than steel posts due to their strength-to-weight ratio.

Does Black Aluminum Fencing Rust?

Black aluminum fencing is a perfect option for those who want a classy, sleek, and modern design. Black Aluminum will not rust because it is protected from the elements by a powder coat finish.

Aluminum is also a more durable material which means that it will last longer than other types of fencing.

Aluminum fences can get very hot in direct sunlight, and not just because they make you feel like you’re roasting. Aluminum is an excellent conductor of heat and will conduct the sun’s rays right back to you.

Aluminum fences get hot during the summertime and can reach up to 150 degrees Fahrenheit (66 degrees Celcius).

Can Aluminum Fence Be Cut To Size?

An aluminum fence post usually has a diameter of 8-inch. The steel inside the post can’t be thinner than 1/4 inch, so it has to be at least that diameter to keep its strength.

However, the posts are designed for you to cut them down if you need them shorter. You can use a hacksaw or a good pair of pruning shears.

Can You Use A Jigsaw To Cut Aluminum?

You can use a jigsaw to cut Aluminum, but it is not recommended. It will take you a lot of time and effort to finish the job. You are better off using a hacksaw or metal cutting blade.

A jigsaw blade will get dull quickly when it cuts Aluminum because of the metal’s hardness. You can use a reciprocating saw, but it might not be able to cut through the material if its diameter is too large at one end.

How Long Will An Aluminum Fence Last?

The life span of an aluminum fence varies. It depends on where it is installed and how well it has been maintained.

While the average life span of an aluminum fence post maybe 20 years, some can last up to 40 years if they have been properly maintained with regular applications of paint and sealant.

Are Aluminum Fences Good For Dogs?

Aluminum fences are a great idea for pet owners. They are durable and strong while being low-maintenance. In addition, the aluminum posts won’t rust or rot, making them perfect for people who have wooden fences damaged from the weather over time.

How Do You Install Aluminum Fence On A Slope?

If you want to put up a fence on a slope, it can be tricky. There are three possible ways to do this: considerer the terrain when installing the posts, set posts at an angle, install angled fence brackets at corners to slope instead of having vertical rails running straight down.

The installation process can be a little tricky and requires some attention to detail. Let’s start with the base of the post – either a concrete slab or a post hole.

At the bottom of the post, you’ll need to drill holes for your lag bolts – 1/2″ from the edge, 1 1/2″ from each other. Next, set your posts in place and tighten them down with a crescent wrench. Now you’re ready to attach your fence rails.

Final Thoughts

Aluminum fencing can endure harsh weather conditions and has a modern look. It is also durable, so it will last for many years. In addition, aluminum fencing is less expensive than other fencing materials, so this can be another reason to choose it over other materials.

We should consider the advantages and disadvantages of aluminum fencing before selecting this type for our home or business premises.

Aluminum fences are advantageous because they are affordable, durable, and have a modern look. Still, they are disadvantageous in that they are not quite as aesthetically pleasing as wood or wrought iron fences.